Client access / registration
- Home page
- Design
- Products
- Applications
- Product catalogue
- Download
Contact
TECH FASS s.r.o.
Věštínská 1611/19
153 00, Prague
Czech Republic
tel.: +420 257 224 398
tel.: +420 257 224 399
e-mail: techfass@techfass.cz
NAC 22
Ordering code: 54422200
The NAC 22 external switchboard for ABLOY EL420 and ABLOY EL520 is designed for connection to the APS BUS of the APS 400 system, where it occupies a single address. Up to 64 address modules for APS 400 system can be connected to a single MCA 168 system controller.
It is appropriate to use the module when using the ABLOY EL420 or ABLOY EL520 locks in the APS 400 system. The device is intended for mounting in installation box or for DIN rail mounting.
NAC 22 data sheet
PDF document, 486 kB
CE Conformity Declaration for NAC 22
PDF document, 142 kB
| Mechanical design | |
| Weight | 0.038 kg |
|---|---|
| Operating temperature | -10°C ÷ +40°C |
| Humidity | Max. 75%, non-condensing |
| Housing | Plastic |
| Environment | Indoor |
| Dimensions | 60x44x16 mm |
| Technical features | ||
| Supply voltage | 8 ÷ 18 VDC | |
|---|---|---|
| Current demand | Typical | 50 mA |
| Maximal | 110 mA | |
| Inputs | 3x signalization from lock | |
| Outputs | 2x lock control | |
| Indicators | 2x LED | |
| 1x low level output for PIEZO buzzer or LED | ||
| Tamper protection | Terminals for external NC contact | |
| Communication interface | RS 485 for system BUS | |
| Addresses used at system BUS | 1 address | |
| HW address setting type | Software configuration | |