Client access / registration
- Home page
- Design
- Products
- Applications
- Product catalogue
- Download
Contact
TECH FASS s.r.o.
Věštínská 1611/19
153 00, Prague
Czech Republic
tel.: +420 257 224 398
tel.: +420 257 224 399
e-mail: techfass@techfass.cz
NIO 22
Ordering code: 54422000
The NIO 22 input/output network module is designed for connection to the APS BUS of the APS 400 system. Up to 64 NIO 22 modules can be connected to a single MCA 168 system controller. This module can be combined with other APS 400 network modules on a communication line; however the total number of addresses on the line must not exceed 64.
The I/O module can be installed wherever additional inputs or outputs are necessary or for mechanical and security reasons. The device is intended for surface mounting in indoor environment.
NIO 22 data sheet
PDF document, 388 kB
CE Conformity Declaration for NIO 22
PDF document, 142 kB
| Mechanical design | |
| Weight | 0.038 kg |
|---|---|
| Operating temperature | -10°C ÷ +40°C |
| Humidity | Max. 75%, non-condensing |
| Housing | Plastic |
| Environment | Indoor |
| Dimensions | 60x44x16 mm |
| Technical features | ||
| Supply voltage | 8 ÷ 18 VDC | |
|---|---|---|
| Current demand | Typical | 50 mA |
| Maximal | 110 mA | |
| Inputs | 2x logical potential-free contact | |
| Outputs | 2x relay NC/NO, 2A/24V | |
| Indicators | 2x LED | |
| 1x low level output for PIEZO buzzer or LED | ||
| Tamper protection | Terminals for external NC contact | |
| Communication interface | RS 485 for system BUS | |
| Addresses used at system BUS | 1 address | |
| HW address setting type | Software configuration | |